2
Installing Software Manager
Note – Computer must support 32-bit applications to use John Deere Software Manager
1.
Download the utility from https://my.deere.com/software-downloads/software-manager
2.
Run or Save and then run the program
3.
Welcome to Software Manager Setup Installer will open.
4.
Select Next to begin installation
5.
Chose Components to install and select Next
6.
Chose Install Location and select Install
7.
Software Manager Utility is now installed on computer. Select Finish.
8.
Open utility
Do All (Download, Sync, and Upload) – Recommended
The following outlines the recommended way to prepare a USB for updating Generation 4
CommandCenter™ or Generation 4 Universal Display software. By Selecting Do All the latest software will
be downloaded, put on the selected drive, and return files uploaded.
An Internet connection is required to successfully complete the download of the new software and to
upload, if connection is not present only sync will complete.
1.
Select Drive location that software will be transferred to and return files uploaded from.
2.
Select Do All to Download, Sync, and Upload to Selected Drive.
Use the Software Manager application on the display to perform the update with the USB. Follow steps in
the onscreen help on the display or the machine Operator Manual.