i580_User_Guide_V1-0_20190521

UNIVERSAL

REMOTE

USER GUIDE

SMART REMOTE

i580

• GETTING STARTED (BATTERIES)

• GETTING STARTED (BUTTONS)

• PROGRAMMING YOUR BEAM REMOTE

• OPTION 1. PROGRAMMING USING THE BEAM APP

• OPTION 2. PROGRAMMING USING THE CODE LIST

• OPTION 3. PROGRAMMING MANUALLY

• ACTIVITIES

• CUSTOM BUTTONS

• FAVORITE CHANNELS

• VOLUME LOCK

• CHANNEL LOCK

• RESET TO FACTORY DEFAULT SETTINGS

• TROUBLESHOOTING

• FCC INFORMATION

• LIMITED WARRANTY

TABLE OF CONTENTS

GETTING STARTED (BATTERIES)

Thank you for choosing the Beam Universal Remote Control. This remote

control can operate a wide range of electronic devices, works across

most brands and models, and comes pre-programmed to operate

many Samsung TVs (see the Programming Your Remote sections if

your device is not compatible). Your remote can control up to 6 devices

and is remarkably easy to set up. To get started, please install four AAA

alkaline batteries (not included) as shown below.

Installing the Batteries

1. Remove the battery cover.

2. Insert the batteries as shown.

3. Snap the battery cover back

into place.

Battery Precautions

• Do not mix old and new batteries.

• Do not mix alkaline, standard

(carbon-zinc) or rechargeable

(nickel-cadmium) batteries.

• Always remove old, weak or worn-

out batteries promptly and recycle

or dispose of them in accordance

with local and national regulations.

Battery Saver

To conserve battery power, the

remote will automatically turn oﬀ

if any button is pressed for more

than 60 seconds (except during

programming). This feature is helpful

in the event that the remote is stuck

in a location where the buttons

remain depressed, such as between

sofa cushions.

Battery Cover

Your remote control’s model number

can be found in the battery compartment

Four AAA

alkaline

batteries

(not included)

Model: i580 (PCL-3)

FCC ID: 2AMLDI580

Made in China

NOTE: Some of the buttons on the remote may not support all of the

functions of the original device remote.

GETTING STARTED (BUTTONS)

POWER INPUT

DEVICE

CATEGORIES

GUIDE

PROGRAM

APPS

CHANNEL

BACK

EXIT

VOLUME

ACTIVITIES

MUTE

INFO

CHANNEL

VIDEO

PLAYBACK

CONTROLS

NUMBER

KEYPAD

FAVORITE

CHANNELS

CUSTOM

BUTTONS

STATUS

INDICATOR

GETTING STARTED (BUTTONS)

POWER

Turns your device On/Oﬀ and also serves as an

indicator when the remote is being programmed

INPUT

Switches between the sources connected to

your TV

DEVICE CATEGORIES

Use these buttons to select the device you want

to control

GUIDE

Use to access the guide of satellite and cable

set-top boxes

PROGRAM

Use to put your remote in programming mode

APPS

Use to access your smart TV’s apps (if

supported)

Return to the previous menu or screen

CUSTOM BUTTONS

Copy your favorite buttons from other remotes

to these blank buttons

INFO

Use to access on-screen content description and

information

ACTIVITIES

You can control 2 or more devices at the same

time using the diﬀerent Activity modes

STATUS INDICATOR (CENTER)

press to see what Device Category or Activity

mode the remote is in

INPUT

There are 3 ways to program your Beam remote:

1. Programming by using the Beam app

2. Programming by using the included code list

3. Programming manually by copying buttons from your original remote

PROGRAMMING YOUR BEAM REMOTE

The Beam Smart Remote app helps you stay updated with new codes

that are added to our cloud database so that your remote doesn’t become

obsolete. The app also makes programming your Beam remote quick

and simple. Download the app for free by following the steps below.

Downloading and using the app

1. Search for “Beam Smart Remote” on either the Apple or Google app

stores and then download it.

2. Make sure the Bluetooth on your smartphone is turned on, then open

the app.

3. Follow the app prompts, to connect with, and program your remote.

OPTION 1. PROGRAMMING USING THE BEAM APP

If you are having trouble programming your Beam remote

with the app, please try using the included printed code

list and programming option shown on the next page.

Beam Smart Remote App

Before beginning, please make sure that the device you want to control

is powered on and follow these three simple steps.

NOTE: The Beam remote comes pre-programmed to operate many

Samsung TVs.

1. Press and hold the PROGRAM button until the POWER button

lights up red.

The POWER button’s red indicator light remains on.

NOTE: Press PROGRAM to exit at any time.

2. Select the device you want to program from the DEVICE CATEGORIES:

The POWER button’s red indicator light blinks once.

OPTION 2. PROGRAMMING USING THE CODE LIST

DEVICE

CATEGORIES

Red indicator light

3. Enter the 4-digit code from the included list for the category and

brand of your device.

The POWER button’s red indicator light shuts oﬀ, and you will hear a

long beep if a valid code was entered.

If the POWER button’s red indicator light ﬂashes and remains on, and

you hear 3 beeps after entering four digits, that means an invalid code

was entered. In that case, check the list again and re-enter the code.

NOTE: Test the remote with the device to make sure all the buttons work

as expected. If some of the buttons/ features don’t work, try a diﬀerent code

in the list. Repeat this process for each device you wish to control.

Code list and other helpful information available at:

www.southerntelecom.com/beam

OPTION 2. PROGRAMMING USING THE CODE LIST

If you are having trouble programming your Beam remote

with the app or included code list, please try the manual

programming option shown on the next page.

When all else fails, this method is the sureﬁre way to get all the buttons

of your original remote working on the Beam! It’s also a great way to

improve one of the codes programmed using the app or code list

methods. Below, are the steps to “copy” buttons from your original

remote to the Beam remote.

NOTE: This programming method requires your device’s original remote.

3. Enter “8888”, and you will hear a short beep that indicates the Beam

remote is ready to receive a signal from your original remote.

OPTION 3. PROGRAMMING MANUALLY

DEVICE

CATEGORIES

1. Press and hold the PROGRAM button of the Beam remote until the

POWER button lights up.

2. Select the device you want to program from the DEVICE CATEGORIES,

the POWER button blinks once.

Original

remote

Beam

remote

4. Hold both remotes approximately 0.5” - 1.0” from each other as shown

below:

5. Press the button on the Beam remote which you want to program,

you hear three beeps, and the Beam’s POWER button ﬂashes and

will continue to ﬂash until the process has been completed.

OPTION 3. PROGRAMMING MANUALLY

NOTE: You can't copy buttons to these buttons on your Beam remote:

• DEVICE CATEGORIES

• CUSTOM BUTTONS

To copy commands to these buttons, please

refer to “Custom Buttons” on page 16.

• PROGRAM BUTTON

• FAVORITE BUTTON

• ACTIVITIES BUTTONS

0.5” - 1.0”

6. On your original remote, press and HOLD the button you want to

copy until you hear a long beep and the Beam’s POWER button

stops ﬂashing.

7. You can copy more buttons by repeating steps 5 and 6. Once you

are ﬁnished copying, press the PROGRAM button on the Beam

remote to exit.

NOTE: Your Beam remote is capable of copying ANY remote control that

uses IR commands. Please test all the buttons copied to the Beam remote,

if any are not working as expected, please repeat steps 1-6, and make sure

that both remotes are VERY CLOSE to each other when the buttons

are copied. Sometimes it may take a few attempts for a button to be

successfully copied.

You can press the PROGRAM button to exit anytime.

OPTION 3. PROGRAMMING MANUALLY

Original

remote

Beam

remote

0.5” - 1.0”

Deleting copied buttons

1. Press and hold the PROGRAM button of the Beam remote until the

POWER button lights up.

2. In DEVICE CATEGORIES, select the device you want RESET or

delete the copied buttons from.

3. Enter “8881”, and you will hear a short beep.

OPTION 3. PROGRAMMING MANUALLY

DEVICE

CATEGORIES

4. Press “0” to delete all the copied buttons for the device selected in

step 2. The LED of the POWER button will ﬂash twice, and you will

hear a long beep.

NOTES: You can press the PROGRAM button to exit anytime.

OPTION 3. PROGRAMMING MANUALLY

In Activity mode, you can control two or more devices at the same

time.

The Beam remote has four Activity modes that combine diﬀerent

devices; each mode has diﬀerent options that can be selected from

the Beam app or programmed from the remote itself.

Customizing Activities

You can change the default Activity settings, by either using the Beam

app (recommended), or following the steps below.

1. Press and hold the PROGRAM button of the Beam remote until

the POWER button lights up solid red.

2. Press the Activity button you want to set, and it will light up. The LED

of the POWER button turns oﬀ.

3. Press the 1,2, or 3 button on the Beam remote, based on the desired

preset number combination (see next page).

4. You’ll hear a long beep conﬁrmation, and the LED of the Activity

button will turn oﬀ.

NOTES:

• Some TVs may require the navigation and enter buttons for input — in

that case you will need to exit the “watch tv” mode and press “TV” in

DEVICE CATEGORIES.

• You can press the PROGRAM button to exit anytime.

ACTIVITIES

WATCH TV

STREAM

WATCH MOVIE

PLAY MUSIC

WATCH TV:

Preset 1: TV + SAT/CBL (Default)

TV: Power, Input, Volume and Mute.

SAT/CBL: Power + Everything else.

Preset 2: TV + SAT/CBL + AUDIO

TV: Power and Input.

Audio: Power, Volume and Mute.

SAT/CBL: Power + Everything else.

Preset 3: TV + AUDIO

TV: Power + Everything else.

Audio: Power, Volume and Mute.

WATCH MOVIE:

Preset 1: TV + B-RAY/DVD (Default)

TV: Power, Input, Volume and Mute.

B-RAY/DVD: Power + Everything else.

Preset 2: TV + B-RAY/DVD + AUDIO

TV: Power and Input.

Audio: Power, Volume and Mute.

B-RAY/DVD: Power + Everything else.

STREAM:

Preset 1: TV + STREAM (Default)

TV: Power, Input, Volume and Mute.

Stream: Power + Everything else.

Preset 2: TV + STREAM + AUDIO

TV: Power and Input.

Audio: Power, Volume and Mute.

Stream: Power + Everything else.

PLAY MUSIC:

Preset 1: TV + AUDIO (Default)

Audio: Power, Volume and Mute.

TV: Power + Everything else.

Preset 2: AUDIO only

Audio: Everything.

NOTE: Press and hold the POWER button to turn on/oﬀ all the activity

devices. All the devices in the activity must be in the same power state for this

feature to work, if they aren’t, there will be a conﬂict as one of the devices will

be in the opposite power state of the others. This can be solved by selecting the

conﬂict device in Device Categories and powering it on/oﬀ from there to

match the other devices.

e.g. When trying to turn on your TV, set top box, and soundbar and the set

top box is already on while the TV and soundbar are oﬀ; when you attempt

to turn them all on, the TV and soundbar will turn on, however, the set top

box will turn oﬀ.

ACTIVITIES

Your Beam remote can easily copy buttons from any other IR remote.

This feature is helpful if there are buttons on your original remote that

aren’t represented on the Beam remote or if you want to apply a favorite

button and have it work regardless of the Device Category or Activity

selected, e.g., use a CUSTOM Button to control your air conditioner

or heater while in any of the DEVICE CATEGORIES or Activity Modes.

CUSTOM BUTTONS

1. Make sure you have a working original remote and the Beam remote.

Hold both remotes approximately 0.5” - 1.0” from each other as shown

below.

Beam

remote

CUSTOM

BUTTONS

Original

remote

Beam

remote

0.5” - 1.0”

CUSTOM BUTTONS

2. Press and hold the CUSTOM button you need to program until you

hear 3 beeps, and the LED of the POWER button starts blinking.

3. On your original remote, press and HOLD the button you want to

copy until you hear a long beep and the Beam’s POWER button

stops ﬂashing.

Power

button

NOTE: Test the CUSTOM Button after copying, if it does not work as

expected please repeat the copying procedure and make sure that both

remotes are VERY CLOSE to each other. Sometimes it may take a few

attempts for the button to be successfully copied.

Press PROGRAM to exit at anytime.

Original

remote

Beam

remote

Power

button

CUSTOM BUTTONS

Repeat the steps above to delete other CUSTOM buttons.

NOTES: Press PROGRAM button to exit at anytime.

Deleting a Custom Button

To delete a Custom button, follow the steps below.

1. Press and hold the CUSTOM button you need to program until you

hear 3 beeps, and the LED of the POWER button starts blinking.

Power

button

2. Press “0000” and you’ll hear a long beep and the LED of the POWER

button turns oﬀ.

For easy access to up to 10 of your favorite channels, follow the steps

below.

1. Select a device from DEVICE CATEGORIES that controls the channels.

The POWER button’s red indicator light will blink once.

2. Press and hold the PROGRAM button until the POWER button lights

up red. The FAV button’s red indicator light remains on.

3. Press the FAV button. The POWER button’s red indicator light blinks

once and remains on.

4. Select the button (0 – 9) that you will use for storing your favorite

channel. The POWER button’s red indicator light blinks once and

remains on.

5. Enter the channel number you wish to program as a favorite channel.

6. Press the FAV button, the POWER button’s red indicator light will

turn oﬀ and the channel is saved.

NOTE: To change a stored favorite channel, repeat steps 1-6 above.

To Access Your Favorite Channels:

1. Press the FAV button. The POWER button’s red indicator lights up

and remains lit.

2. To access the favorite channel, press the programmed button for that

channel (0-9). The POWER button’s red indicator light blinks, then

turns oﬀ as the command is sent.

FAVORITE CHANNELS

Use this feature to lock a device to the remote’s volume control. For

example, the remote can be in TV mode while the volume buttons

control your sound bar.

Enabling Volume Lock:

1. Press and hold the PROGRAM button until the POWER button lights

up red. The POWER button’s red indicator light remains on.

2. Select a device from DEVICE CATEGORIES that you want to lock to

the remote’s volume control. The POWER button’s red indicator

light blinks once and remains on.

3. Press the VOL+ button. The POWER button’s red indicator light blinks

once and remains on.

4. Press the OK button. The POWER button’s red indicator light will

blink twice and turn oﬀ.

Disabling Volume Lock:

1. Press and hold the PROGRAM button until the POWER button lights

up red. The POWER button’s red indicator light remains on.

2. Press the VOL- button. The POWER button’s red indicator light blinks

once and remains on.

3. Press the OK button. The POWER button’s red indicator light will

blink twice and turn oﬀ.

NOTE: On most newer HDMI-connected devices, the Volume Lock feature

may be unnecessary as this feature is already built-in.

VOLUME LOCK

Use this feature to lock a device to the remote’s channel control. For

example, the remote can be in TV mode while the channel buttons

control your satellite or cable box.

Enabling Channel Lock:

1. Press and hold the PROGRAM button until the POWER button lights

up red. The POWER button’s red indicator light remains on.

2. Select a device from DEVICE CATEGORIES that you want to lock to

the remote’s channel control. The POWER button’s red indicator

light blinks once and remains on.

3. Press the CH+ button. The POWER button’s red indicator light blinks

once and remains on.

4. Press the OK button. The POWER button’s red indicator light will

blink twice and turn oﬀ.

Disabling Channel Lock:

1. Press and hold the PROGRAM button until the POWER button

lights up red. The POWER button’s red indicator light remains on.

2. Press the CH- button. The POWER button’s red indicator light blinks

once and remains on.

3. Press the OK button. The POWER button’s red indicator light will

blink twice and turn oﬀ.

NOTE: On most newer HDMI-connected devices, the Channel Lock feature

may be unnecessary as this feature is already built-in.

CHANNEL LOCK

1. Press and hold the PROGRAM button until the POWER button lights

up red. The POWER button’s red indicator light remains on.

2. Press the INFO button. The POWER button’s red indicator light blinks

once and remains on.

3. Press the OK button. The POWER button’s red indicator light will

ﬂash twice, and you will hear a long beep.

RESET TO FACTORY DEFAULT SETTINGS

The troubleshooting tips below can help solve problems and answer questions

you may have with your Beam remote control.

The remote can’t be programmed to operate my device

• If you’re using the app and having trouble programming your remote, try using

the included printed code list or the manual programming method explained

in the Programming section of this user guide.

Some of the buttons of the remote are not supported or working properly on

my device

• It's possible the code that you programmed is not fully compatible with your

device. Try selecting the next code from the options available for the category

and brand of your device. If you are unsuccessful at ﬁnding a better matching

code, it may be that there are some buttons from your device's original remote

that are not supported. You can easily copy them using the Custom Buttons

or Programming Manually methods explained in this user guide.

My device does not match any of the DEVICE CATEGORIES on the remote

• If you have a device such as an air conditioner, heater, or anything else that is

controlled by an IR remote and does not ﬁt one of the remote’s Device

Category options, on the app select OTHER and use SMART SEARCH to try and

ﬁnd a matching code from our cloud database or copy all the buttons of the

original remote and store it under OTHER in Device Categories of the remote.

My device’s menu or app hub does not appear

• Menu and app hub access isn’t supported for all brands. You can copy that

button from your original remote to the Beam remote using the Custom

Buttons or Program Manually method.

The remote will not adjust the volume or channel on my device

• Make sure the remote is in the correct Device Category mode (TV, SAT/CBL,

AUDIO, B-RAY/DVD, STREAM, OTHER) that controls the volume and channel of

your device.

How do I know what Device Category or Activity mode the remote is in?

• When you press any button on the remote, the current Device Category or

Activity mode is lit in red.

I copied a button from my original remote but it’s not working

• Beam is capable of copying any IR remote control button. However, sometimes

it is necessary to repeat the copying procedure to get the button working

properly- sometimes several attempts are required. Please make sure that

when copying, the two remotes are held closely together with their fronts

pointing at each other.

I can’t change the Activity settings on the app or on the remote

• To use the Activity buttons to control combo devices like TV+STB/CBL or

TV+DVD, you must program the individual corresponding devices. Please refer

to the Activity section in the user guide for more information.

When I press the POWER button in Activity mode, some of my devices do

not simultaneously turn on or o

• For this feature to work, prior to pressing the POWER button, all the devices

must be either on or oﬀ.

My remote isn’t working properly

• Try changing the batteries and make sure they are properly installed. If possible,

use alkaline batteries.

I cannot nd my remote

• Open the app and on the home screen press “FIND MY REMOTE”. If the remote

doesn’t beep, try walking around to the areas where you believe the remote

was lost.

For more information, please visit www.southerntelecom.com/beam

TROUBLESHOOTING

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions may cause harmful interference

to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment oﬀ and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modiﬁcations not expressly approved by

the party responsible for compliance could void the user’s authority

to operate this equipment.

FCC INFORMATION

1-Year Limited Warranty

Territory: United States/Canada

LIMITED WARRANTY TO ORIGINAL CONSUMER

This product (including any accessories included in the original packaging)

as supplied and distributed new by an authorized retailer is warranted

by Southern Telecom, Inc. to the original consumer purchaser against

defects in materials and workmanship (“Warranty”) as follows:

To obtain warranty service:

• Visit our website at www.southerntelecom.com

• Click on Product Support

• Select the Brand of your device

• Select Service Request and ﬁll out the form to begin your inquiry

Your product will be repaired or replaced, at our option, for the same

or similar model of equal value if examination by the service center

determines this product is defective. Products received damaged as a

result of shipping will require you to ﬁle a claim with the carrier.

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse,

abuse, improper installation or operation, lack of reasonable care,

unauthorized modiﬁcation including software modiﬁcations such as the

installation of custom ﬁrmware. This warranty is voided in the event

any unauthorized person opens, alters or repairs this product. All products

being returned to the authorized service center for repair must be

suitably packaged.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY

DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS

ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED

ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY

PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE

BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE

ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION -

ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL

DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL,

DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES

(SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,

BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE

OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO

OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING,

CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED

THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE

ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT

TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation

of incidental or consequential damages or allow limitations on warranties,

so limitation or exclusions may not apply to you. This warranty gives

you speciﬁc legal rights, and you may have other rights that vary from

state to state or province to province. Contact your authorized retailer

to determine if another warranty applies.

MADE IN CHINA

LIMITED WARRANTY

1-Year Limited Warranty

Territory: United States/Canada

LIMITED WARRANTY TO ORIGINAL CONSUMER

This product (including any accessories included in the original packaging)

as supplied and distributed new by an authorized retailer is warranted

by Southern Telecom, Inc. to the original consumer purchaser against

defects in materials and workmanship (“Warranty”) as follows:

To obtain warranty service:

• Visit our website at www.southerntelecom.com

• Click on Product Support

• Select the Brand of your device

• Select Service Request and ﬁll out the form to begin your inquiry

Your product will be repaired or replaced, at our option, for the same

or similar model of equal value if examination by the service center

determines this product is defective. Products received damaged as a

result of shipping will require you to ﬁle a claim with the carrier.

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse,

abuse, improper installation or operation, lack of reasonable care,

unauthorized modiﬁcation including software modiﬁcations such as the

installation of custom ﬁrmware. This warranty is voided in the event

any unauthorized person opens, alters or repairs this product. All products

being returned to the authorized service center for repair must be

suitably packaged.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY

DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS

ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED

ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY

PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE

BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE

ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION -

ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL

DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL,

DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES

(SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,

BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE

OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO

OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING,

CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED

THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE

ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT

TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation

of incidental or consequential damages or allow limitations on warranties,

so limitation or exclusions may not apply to you. This warranty gives

you speciﬁc legal rights, and you may have other rights that vary from

state to state or province to province. Contact your authorized retailer

to determine if another warranty applies.

MADE IN CHINA

LIMITED WARRANTY